XSFans.com : RSS Best Sellers Feed

Socket 478 Heatsink Retention Bracket Module Black

support@xsfans.com (XS Fans) — Sun, 15 Aug 2010 08:05:37 -0400

This black heatsink retention module fits standard socket 478 motherboards.

Included

1 bracket
4 push-pins

Dell Owners: This bracket is the same as dell P/N: 8T065 for Dimension 2300 & 2350. Just pop out the push-pins to use.

NEW. Bulk Packaged

AddA 40mm x 10mm 12v VGA/Chipset 2-pin Medium Speed Fan

support@xsfans.com (XS Fans) — Fri, 16 Apr 2010 21:38:21 -0400

This 2-pin AddA AD0412MB-G70 dual ball bearing fan is high quality and runs extra quiet. Get yours today!

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Rated Current: 0.08A (0.06A actual)
Rated Power: 0.96W (0.72W actual)
Air Flow: 5.70 CFM
Air Pressure: 1.98 mmH2O
Noise: 20dBA
Fan Speed: 4800RPM
Bearing Type: Dual Ball Bearings
Connector: 2-Pin (5" Length)
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

23mm x 23mm x 10mm Passive Chipset Heatsink Stick-On

support@xsfans.com (XS Fans) — Sun, 01 Aug 2010 19:27:40 -0400

This black, anodized aluminum alloy heatsink measures 23mm x 23mm x 10mm (15/16" x 15/16" x 3/8"). Peel-off thermal adhesive tape has been pre-applied for easy installtion.

Installation Instructions
Peel off the protective layer on the bottom and press the heatsink on to a clean surface.

NEW. Bulk Packaged

Delta AFB0412MA 40mm x 10mm 12v Fan 2-Bare Wire Dual BB

support@xsfans.com (XS Fans) — Sat, 31 Jul 2010 14:41:38 -0400

This dual ball bearing Delta AFB0412MA is perfect as a VGA/Chipset fan. This fan has bare wires; no connector. Get yours today!

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Input Power: 1.2W
Current: 0.10A
Air Flow: 9.6CFM
Noise: 30dBA
Fan Speed: 7000RPM
Bearing Type: Dual Ball Bearings
Connector: NONE (11" Bare Leads)
Speed Sensor: NO

NOTE: This is the original AFB0412MA. Delta also produces a lower speed, 7-bladed Revision-A version.

Condition: NEW
Packaging: Bulk
Additional Hardware: No

ARX Ceradyne-A 40mm x 10mm 2-pin Mini Fan - Black Label

support@xsfans.com (XS Fans) — Wed, 21 Apr 2010 05:55:22 -0400

This ARX FD1240-A2012A medium speed fan features the Ceradyne-A ceramic fan shaft bearing system. These fans are surplus from a large US electronics house that uses their own brand label, so there's only a plain black label on the hub. It has the smaller mini 2.0mm pitch connector found on many chipset fans.

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Input Power: 1.08W
Current: 0.09A
Air Flow: 6.11 CFM
Air Pressure: 0.10 in-H2O
Noise: 27.5dBA
Fan Speed: 5500RPM
Bearing Type: Ceradyne-A
Connector: 2-Pin 2.0mm (4" Length)
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Lotes Socket 478 Heatsink Retention Bracket Module

support@xsfans.com (XS Fans) — Sun, 15 Aug 2010 08:05:47 -0400

This heatsink retention module fits standard socket 478 motherboards.

Included

1 bracket
4 push-pins

Dell Owners: This bracket is the same as dell P/N: 8T065 for Dimension 2300 & 2350. Just pop out the push-pins to use.

NEW. Bulk Packaged

Right Angle 90-degree Molex 4-Pin Power Extension Cable 9-inch

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:44:16 -0400

9-inch Right Angle Female 4-Pin Molex Power Extension Cable

NEW. Bulk Packaged

Y.S.Tech FD1260107B-2N 60mm x 10mm 2-Wire 2BB Fan

support@xsfans.com (XS Fans) — Thu, 19 Aug 2010 13:17:41 -0400

This 2-wire Y.S.Tech FD1260107B-2N dual ball bearing fan comes with bare, tinned leads.

Specifications

Dimensions: 60x60x10mm
Voltage: 12VDC
Operating Voltage: 7~13.2VDC
Fan Speed: 3800RPM
Bearing Type: Dual Ball Bearing
Noise: 33dBA
Current: 140mA
Air Flow: 17.3CFM
Pressure: 2.1 mmH2O
Input Power: 1.68W
Connector: 2-wire bare tinned leads (approx 11")
Speed Sensor: NO
Made in Taiwan

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Male/Male Molex 4-Pin Power Patch Cable Gender Changer

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:43:56 -0400

This hard-to-find adapter is a Male to Male 4-pin molex patch cable for internal computer power cables.

NEW. Bulk Packaged

AVC DA08020B12U 80mm x 20mm PWM 4-Pin 2BB CPU Fan

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:31:31 -0400

This AVC DA08020B12U high output dual ball bearing fan has the PWM circuitry required on todays latest motherboards. Attached to a 3-pin header, this fan will run at full power.

Specifications (full power)

Dimensions: 80 x 80 x 20mm
Voltage: 12VDC
Voltage Range: 5.0 ~ 13.2v
Input Power: 4.56W
Current: 0.46A
Max Fan Speed: 4800 RPM
Max Air Flow: 59.27 CFM
Bearing Type: Dual Ball Bearings
Noise: 46.5 dBA
Air Pressure: 9.2 mmH2O
Connector: 4-Pin Mainboard w/PWM (3-Pin Compatible) approx 7"
Speed Sensor: YES
Frame Style: Closed Corners

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Delta AFB0512MB 50mm x 15mm Dual Ball Bearing 2-Pin Fan

support@xsfans.com (XS Fans) — Sun, 01 Aug 2010 08:51:14 -0400

This high quality 2-pin Delta AFB0512MB dual ball bearing fan moves a lot of air with very little noise.

Specifications

Dimensions: 50 x 50 x 15mm
Voltage: 12VDC
Voltage Range: 7.0 ~ 13.8V
Air Flow: 12.36 CFM
Noise: 28 dBA
Bearing Type: Dual Ball Bearings
Fan Speed: 4800RPM
Rated Current: 0.12A
Connector: 2-Pin (approx 6")
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Just Cooler 40mm x 10mm Medium Speed 2-pin Fan

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:34:12 -0400

This Just Cooler model A4010M12S is a good all-purpose fan at a budget price. It's ideal for use as a VGA or chipset cooling fan replacement. Get yours today.

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Current: 0.09A
Noise: 28dBA
Fan Speed: 5000RPM
Bearing Type: Sleeve
Connector: 2-Pin (12" Length)
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

AVC DE07015T12L 70mm x 15mm Ball Bearing CPU Fan

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:37:50 -0400

This low noise, single ball bearing 3-pin AVC DE07015T12L is an ideal fan replacement for many cpu coolers.

Specifications

Dimensions: 70 x 70 x 15mm
Voltage: 12VDC
Voltage Range: 5.0~13.2v
Input Power: 1.56W
Current: 0.3A
Fan Speed: 2900 RPM
Air Flow: 18.78 CFM
Noise: 28.5dBA
Connector: 3-Pin (approx 6.5")
Air Pressure: 0.124 in-H�O
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

4-Pin Molex to Floppy Drive 4-Pin Power Cable

support@xsfans.com (XS Fans) — Wed, 17 Feb 2010 13:31:12 -0500

This adapter cable converts a large 4-pin Molex connector to power standard floppy drives, zip drives, LS-120's, etc.

NEW. Bulk Packaged

Socket 754 939 940 K8 Heatsink Retention Bracket w/Backplate

support@xsfans.com (XS Fans) — Mon, 26 Jul 2010 12:06:13 -0400

Keep your heatsink in place with this new K8 heatsink retention module and backplate from Evercool. NOTE: installation requires access to the back of the motherboard.

Included

1 retention bracket
1 backing plate
2 attachment screws

FITS AMD SOCKET 754, 939 & 940
(Will NOT fit AM2)

NEW. Bulk Packaged

ARX Ceradyne-A 40mm x 10mm 2-pin Fan - Black Label

support@xsfans.com (XS Fans) — Mon, 07 Jun 2010 07:59:52 -0400

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Input Power: 1.08W
Current: 0.09A
Air Flow: 6.11 CFM
Air Pressure: 0.10 in-H2O
Noise: 27.5dBA
Fan Speed: 5500RPM
Bearing Type: Ceradyne-A
Connector: 2-Pin (4" Length)
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Intel Red SATA II Cable 20-inch w/ Metal Latch C95764-001

support@xsfans.com (XS Fans) — Sat, 03 Jul 2010 10:24:21 -0400

This is a brand new 20-inch red SATA II data cable with straight connectors. Both connectors have a metal latch. The cable was manufactured for Intel by BizLink. Intel p/n: C95764-001. Backward compatible with SATA.

Serial Advanced Technology Attachment SATA is a computer bus primarily designed for transfer of data between a computer and mass storage devices such as hard disk drives and optical drives.

The main advantages over the older parallel ATA interface are faster data transfer, ability to remove or add devices while operating (hot swapping), thinner cables that let air cooling work more efficiently, and more reliable operation with tighter data integrity checks.

NEW. Bulk Packaged

10pc Crimp Pins 2.54mm Pitch

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:45:18 -0400

These are new crimp pins for 2.54mm female connector housings.

NEW. Bulk Packaged

12-inch Female Molex 4-Pin Power Patch Cable F/F Gender Changer

support@xsfans.com (XS Fans) — Mon, 21 Jun 2010 05:32:11 -0400

This is a hard-to-find 12-inch female to female 4-pin molex patch cable for internal computer power cables.

NEW. Bulk Packaged

Dynatron DF127015PH 70mm x 15mm High Speed BB CPU Fan

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:32:36 -0400

The Dynatron/Top Motor DF127015PH is a high speed, high performance, ball bearing cpu cooler replacement fan. It has a 3-pin connector and tachometer wire.

Specifications

Dimensions: 70 x 70 x 15mm
Voltage: 12VDC
Input Power: 4.1W
Current: 0.34A
Fan Speed: 4300 RPM
Air Flow: 30.24 CFM
Noise: 37.5 dBA
Connector: 3-Pin (approx 8")
Air Pressure: 4.15 mm-H�O
Bearing Type: Single Ball Bearing
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

4-Pin to 3-Pin Fan Adapter Cable

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:36:32 -0400

This is a handy, inexpensive converter to power a 4-pin molex fan off a 3-pin fan header.

NEW. Bulk Packaged

AddA AD0412HB-C56 40mm x 20mm 2BB HSF Fan - Bare Leads

support@xsfans.com (XS Fans) — Tue, 23 Mar 2010 06:14:19 -0400

This high speed AddA AD0412HB-C56 dual ball bearing fan is high quality and moves lots of air. It has 3 bare wires with speed detection-no connector.

Specifications

Dimensions: 40 x 40 x 20mm
Voltage: 12VDC
Rated Current: 0.10A
Rated Power: 1.2W
Air Flow: 8.8 CFM
Air Pressure: 0.28 In-H2O
Noise: 36dBA
Fan Speed: 7800RPM
Bearing Type: Dual Ball Bearings
Connector: NONE-Bare Wire (3" Length)
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Cisco 2924 Switch Replacement Fan CIS2924FAN Fonsan DFB0412M

support@xsfans.com (XS Fans) — Sun, 20 Jun 2010 11:04:36 -0400

This Fonsan (Delta) DFB0412M is a replacement fan for Cisco 2924 Series Switch's, model: CIS2924FAN

Condition: NEW
Packaging: Bulk
Additional Hardware: No

VIO 1.5G Thermal Grease CPU Heat Sink Compound

support@xsfans.com (XS Fans) — Mon, 12 Jul 2010 14:02:13 -0400

This re-sealable VIO 1.5g thermal grease injector will greatly improve heat transfer away from expensive computer cpu's and chipsets. Heat is a major issue in today's computers and thermal grease helps the heat dissipation from a CPU to a heat sink. Thermal grease needs to be applied in thin layers to increase heat transmission - the idea is to fill only the air gaps with the paste and nothing more. This white thermal grease is made up of silicone compounds.

Features

1.5 gram of thermal compound (Thermal Grease) for CPU use
Easy apply, re-sealable injector tube
Helps the heat dissipation from a CPU to a heatsink
White silicone thermal compound

NEW. Packaged in individual blister packs

Y.S.Tech FD125010HB 50mm x 10mm High Speed BB Fan 3-Pin

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:39:53 -0400

This high performance Yen Sun FD125010HB fan has ball bearing construction for extra-long life. This 3-pin model features a third wire for speed detection.

Specifications

Dimensions: 50 x 50 x 10mm
Voltage: 12VDC
Operating Voltage Range: 7.0~13.2V
Bearing Type: Single Ball Bearing
Fan Speed: 5200RPM
Current: 0.14A
Power: 1.68W
Air Flow: 12CFM
Noise: 34dBA
Air Pressure: 3.0mm-H2O
Connector: 3-Pin; 8" length
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

12-inch Molex 4-Pin LP4 Power Extension Cable M/F

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:38:14 -0400

Molex cable doesn't reach? Get this 12-inch Molex 4-Pin LP4 Power Extension Cable for internal computer power lines.

NEW. Bulk Packaged

Reverse 4-Pin to 3-Pin Fan Adapter Cable MolexDuo

support@xsfans.com (XS Fans) — Sun, 11 Jul 2010 08:52:09 -0400

Use this adapter to connect 4-pin Molex fans to a 3-pin header. Specifically, this adapter is intended to connect a 4-pin fan to a fan speed controller. Most fan speed controllers have only 3-pin male headers and adapters are often not included.

These are also used to connect a 4-pin fan to a 3-pin motherboard header.

NEW. Bulk Packaged

AVC DA07015B12U 70mm x 15mm Ultra High Speed 2BB CPU Fan

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:31:59 -0400

The AVC DA07015B12U is an extremely high speed, high performance cpu cooler replacement fan with dual ball bearings. It has a short 3-pin connector and tachometer wire.

Specifications

Dimensions: 70 x 70 x 15mm
Voltage: 12VDC
Voltage Range: 5.0~13.2v
Input Power: 5.28W
Current: 0.70A
Fan Speed: 5400 RPM
Air Flow: 46.06CFM
Noise: 46dBA
Connector: 3-Pin (approx 3")
Air Pressure: 0.370 in-H�O
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

ARX Ceradyne-A 40mm x 10mm 2-pin (2.5mm) Fan - Black Label

support@xsfans.com (XS Fans) — Mon, 24 May 2010 06:57:51 -0400

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Input Power: 1.08W
Current: 0.09A
Air Flow: 6.11 CFM
Air Pressure: 0.10 in-H2O
Noise: 27.5dBA
Fan Speed: 5500RPM
Bearing Type: Ceradyne-A
Connector: 2-Pin 2.50mm (4" Length)
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Delta EFB0412HHA 40mm x 10mm 2-Pin 2BB Fan

support@xsfans.com (XS Fans) — Wed, 14 Apr 2010 18:13:40 -0400

This extra high speed dual ball bearing Delta EFB0412HHA is perfect as a VGA/Chipset fan. The connector is a 2-pin dupont style; it will fit standard 2.54mm pitch headers.

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Input Power: 1.20W
Current: 0.15A
Air Flow: 8.09CFM
Noise: 33dBA
Fan Speed: 7000RPM
Bearing Type: Dual Ball Bearings
Connector: 2-Pin (approx 3")
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

4-Pack ZioTek 19mm Rubber Fan Mounts Rivet Anti Vibration

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:39:24 -0400

Lower fan noise and vibration with this set of 4 ZioTek 19mm rubber push-pins.

Features

19mm length
secured with hard plastic locking pin
Reduces Vibration
Tooless Installation
Re-usable
quantity: 4

NEW. Bulk Packaged

12-inch Fan 3-Pin Extension Power Cable

support@xsfans.com (XS Fans) — Tue, 19 Jan 2010 13:33:12 -0500

This is a standard 12-inch male/female 3-pin, 3-wire fan extension cable.

NEW. Bulk Packaged

AddA AD0412HB-C56 40mm x 20mm 3-Pin 2BB HSF Fan

support@xsfans.com (XS Fans) — Sun, 09 May 2010 20:40:16 -0400

This high speed AddA AD0412HB-C56 dual ball bearing fan is high quality and moves lots of air. It has 3 wires with speed detection.

Specifications

Dimensions: 40 x 40 x 20mm
Voltage: 12VDC
Rated Current: 0.10A
Rated Power: 1.2W
Air Flow: 8.8 CFM
Air Pressure: 0.28 In-H2O
Noise: 36dBA
Fan Speed: 7800RPM
Bearing Type: Dual Ball Bearings
Connector: 3-Pin (3" Length)
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Dynatron DF126010PM 60mm x 10mm High Speed BB Fan

support@xsfans.com (XS Fans) — Thu, 19 Aug 2010 13:17:24 -0400

This Top Motor DF126010PM ball bearing fan is perfect for many older cpu coolers.

Specifications

Dimensions: 60 x 60 x 10mm
Voltage: 12VDC
Fan Speed: 4500RPM �10%
Noise: 33.84dBA
Current: 0.24A
Max Air Flow: 19.86CFM
Air Pressure: 3.77 mmH2O
Input Power: 2.88W
Connector: 3-Pin (7" lead)
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Wakefield 40mm x 40mm x 6mm Heatsink Press-On

support@xsfans.com (XS Fans) — Mon, 21 Jun 2010 05:30:49 -0400

This Wakefield anodized black aluminum alloy heatsink fits many GPUs and northbridge chipsets. A peel-off thermal adhesive tape has been pre-applied for easy installation.

Installation Instructions
Peel off the protective layer on the bottom and press the heatsink on to a clean surface.

Specifications

Dimensions: 40.6mm x 40.6mm x 6.6mm (1.6" L x 1.6" W x 0.26" H)
Base Thickness 3.2mm (0.125")
Qsa �C/W/3: 14.00
Perim. (in.): 7.00
Series No.: 655

NEW. Bulk Packaged

37mm x 37mm x 6mm Passive North Bridge Heatsink Stick-On

support@xsfans.com (XS Fans) — Mon, 19 Apr 2010 14:47:42 -0400

This green, anodized aluminum alloy heatsink fits standard sized northbridge chips. measures 37mm x 37mm x 6mm. Peel-off thermal adhesive tape has been pre-applied for easy installation.

Installation Instructions
Peel off the protective layer on the bottom and press the heatsink on to a clean surface.

NEW. Bulk Packaged

NMB 40mm x 15mm 1606KL-04W-B59 12v 3-pin High Speed Fan

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:34:41 -0400

This very high speed dual ball bearing NMB 1606KL-04W-B59 fan has speed detection.

Specifications

Dimensions: 40 x 40 x 15mm
Voltage: 12VDC
Input Power: 1.02W
Current: 0.11A
Air Flow: 8.1CFM
Noise: 34dBA
Fan Speed: 8000RPM
Air Pressure: 0.250 in-H2O
Bearing Type: Dual Ball Bearings
Connector: 3-Pin (approx 10". Connector color may vary)
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

20pc Hex Swage Stand-Off M3 Threaded Brass

support@xsfans.com (XS Fans) — Wed, 17 Mar 2010 06:19:10 -0400

20 brass hex swage stand-off, threaded:

Specifications

M3 Thread x 5mm O.D.
Height (above panel): 3mm
Shank Length: 3mm
Shank Diameter: 4mm
Threaded Through

These swages are an exact fit for the 40mm ARX fans we have listed. See the photo above for an example of how they are used (fan not included).

NEW. Bulk Packaged

2pcs Sekisui Thermal Tape 25mm x 25mm Double-Sided Adhesive

support@xsfans.com (XS Fans) — Sat, 05 Jun 2010 14:07:47 -0400

No mounting holes on your motherboard for chipset heatsinks?? Not to worry. Here's double sided thermal tape to stick on that heat sink with. It's a lot cheaper than epoxy and a lot easier to use, too.

Specifications

dimensions: 25mm x 25mm (1-inch x 1-inch)
thickness: 0.001377949" or 35micrometers or 0.035mm
thermal resistance @ 45C Rja (�C/W)
quantity: 2 pieces

CAUTION: NOT FOR USE ON CPU!

NEW. Bulk Packaged

Stars AK-100 White Thermal Grease Soft Pak 1g

support@xsfans.com (XS Fans) — Sat, 06 Mar 2010 07:16:55 -0500

Stars AK-100 white thermal grease creates the best thermal connection between your processor and heat sink. This convenient, single use 1-gram packet of silicone zinc compound works with any socket type processor and is a must for today's high speed CPUs.

Features

1g net weight
Helps the heat dissipation from a CPU to a heatsink
White silicone thermal compound
>7.0 W/m-k thermal conductivity
>0.05�C-in2/w thermal resistance

NEW. Bulk Packaged

10pc 2-Pin Fan 2510 Crimp Housings

support@xsfans.com (XS Fans) — Mon, 21 Jun 2010 08:00:05 -0400

Lot of (10) 2-Pin fan connector housings. They take the same standard pins as a 3-Pin fan connector (2.54mm). Includes housing only - NO PINS.

NEW. Bulk Packaged

Chassis Case System Speaker 2-Wire 4-Pin

support@xsfans.com (XS Fans) — Sat, 03 Jul 2010 10:23:36 -0400

This chassis speaker is the speaker that attaches to the motherboard and beeps annoying error codes while the machine boots up. It's quite useful for troubleshooting.

NEW. Bulk Packaged

AMD AM2/AM2+ Heatsink Retention Module & Backplate - Red

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:25:56 -0400

Keep your AMD Socket AM2, AM2+ & AM3 CPU cooler in place with this attractive red retention bracket module. It features an insulated, sturdy steel backplate to secure even the heaviest after-market heatsinks.

Included

1 plastic retention module
4 screws
1 insulated metal backing plate

NEW. Bulk Packaged

AMD AM2/AM2+ Heatsink Retention Module & Backplate

support@xsfans.com (XS Fans) — Sun, 15 Aug 2010 08:06:14 -0400

Keep your AMD Socket AM2, AM2+ & AM3 CPU cooler in place with this complete retention bracket module. It features an insulated, sturdy steel backplate to secure even the heaviest after-market heatsinks.

Included

1 plastic retention module
4 screws
1 insulated metal backing plate

please note: some heatsinks with heatpipes will not sit properly in this bracket because of the extra reinforcement around the attachment tabs

NEW. Bulk Packaged

Sunon KDE1204PFV1 40mm x 10mm 2-Pin VGA/Chipset Fan

support@xsfans.com (XS Fans) — Sat, 10 Jul 2010 22:09:04 -0400

This high speed 2-pin Sunon KDE1204PFV1 is configured as a VGA/Chipset fan. It features Sunon's famous VAPO MagLev bearing system.

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Input Power: 1.0W
Air Flow: 7.3CFM
Noise: 30dBA
Fan Speed: 7400RPM
Static Pressure: 0.23 inch-H2O
Bearing Type: VAPO Magnetic Levitation
Connector: 2-Pin 2.50mm (3" Length)
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

3Com SuperStack Replacement Fan 1666-510-666-1 AD0412MB-G70

support@xsfans.com (XS Fans) — Thu, 15 Apr 2010 14:36:00 -0400

This is a 3Com replacement fan for SS3 1U Switches. P/N 1666-510-666-1. Ships in a plastic bag with a 3COM label.

Condition: NEW
Packaging: Bulk
Additional Hardware: No

PLCC IC Chip Extractor 18-Pin to 124-Pin Removal Tool

support@xsfans.com (XS Fans) — Tue, 03 Nov 2009 06:14:27 -0500

This PLCC IC Chip Extractor 18-Pin to 124-Pin Removal Tool is suitable for 18-pin to 124-pin PLCC IC extraction. It's a spring assisted Chip carrier extractor that extracts most PLCC's.

Features

Suitable for 18-pin to 124-pin PLCC IC extraction
Spring assisted
Chip carrier extractor
Extracts most PLCC's

NEW. Retail Package

24pc Hard Drive Mounting Screws Coarse Thread

support@xsfans.com (XS Fans) — Tue, 04 May 2010 14:24:40 -0400

Quantity of 24 screws for hard drives and other internal computer devices requiring 6/32 coarse-threaded screws.

NEW. Bulk Packaged

4-Pack ZioTek 19mm Rubber Fan Mounts Rivet - Loose Fit

support@xsfans.com (XS Fans) — Fri, 12 Mar 2010 20:06:58 -0500

Lower fan noise and vibration with this set of 4 ZioTek 19mm loose fit rubber push-pins.

Features

19mm length (loose fit)
secured with hard plastic locking pin
Reduces Vibration
Tooless Installation
Re-usable
quantity: 4

NEW. Bulk Packaged

Bi-Sonic 50mm x 10mm Ball Bearing Medium Speed Fan 3-Pin

support@xsfans.com (XS Fans) — Sun, 30 May 2010 21:39:07 -0400

This 3-pin Bi-Sonic/Innovative BS501012M medium speed fan is a strong, all-purpose performer. It features a single ball bearing and has speed detection.

Specifications

Dimensions: 50 x 50 x 10mm
Voltage: 12VDC
Bearing Type: Single Ball Bearing
Fan Speed: 4000RPM
Current: 0.08A
Air Flow: 8.79CFM
Noise: 29dBA
Connector: 3-Pin; 8" length (connector color may vary)
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

50mm Wire Fan Grill - Black

support@xsfans.com (XS Fans) — Wed, 17 Mar 2010 06:36:45 -0400

This black wire grill prevents objects from getting caught in your 50mm fan. Finish is flat black; very nice looking. Mounting screws sold separately.

NEW. Bulk Packaged

Delta 60mm x 10mm Medium Speed 2BB Fan EFB0612MA

support@xsfans.com (XS Fans) — Mon, 12 Jul 2010 13:54:12 -0400

This high quality dual ball bearing Delta EFB0612MA is a popular model and size for cpu cooler fans, especially on Socket A/370 cpu's.

Specifications

Dimensions: 60 x 60 x 10mm
Voltage: 12VDC
Voltage Range: 7.0 ~ 13.8v
Current: 0.12A
Input Power: 0.96W
Max Fan Speed: 3600RPM
Max Air Flow: 15.54CFM
Max Air Pressure: 0.094 in-H2O
Bearing Type: Dual Ball Bearings
Noise: 29dBA
Connector: 3-Pin (approx 6")
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Masscool FD08025S1M3/4 80mm x 25mm Case Fan

support@xsfans.com (XS Fans) — Tue, 27 Apr 2010 16:36:40 -0400

Need to replace a case fan? This Masscool FD08025S1M3/4 is a great choice. It maximizes compatibility with both a 3-pin and 4-pin molex connector on an extra long 20" cable. The cable is even sleeved to reduce case clutter. All for a reasonable price. Oh yeah, it also comes with a set of 4 case screws. Get yours today!

Specifications

Dimensions: 80 x 80 x 25mm
Voltage: 12VDC
Current: 0.15A
Fan Speed: 2500RPM
Air Flow: 31.75CFM
Noise: 28 dBA
Bearing Type: Sleeve
Frame Style: Open Corners
Connector: 3-pin & 4-Pin Molex (approx 20")
Speed Sensor: YES

Condition: NEW
Packaging: Retail
Additional Hardware: (4) case screws

JMC/Datech 60mm x 20mm Temp Controlled Fan Dell 7R573

support@xsfans.com (XS Fans) — Mon, 24 May 2010 06:55:13 -0400

This JMC-Datech is an OEM replacement for several Dell models. Dell part number: 7R573 OPTIPLEX - GN, GX1,GX1 L,GX100 SFX,GX110,GX110 L,GX1P,GXA,GXA EM L,GXA L; Poweredge 1600SC

The connector and wiring on this fan are is configured for use on a dell. Take special note that the white tachometer wire is in the center position to accomodate dell (in case you plan to use this fan for something other than a dell).

Condition: NEW
Packaging: Bulk
Additional Hardware: No

2-Pin M/F Fan Extension Power Cable 12-inch

support@xsfans.com (XS Fans) — Sun, 17 Jan 2010 15:07:18 -0500

This is a 12-inch standard sized 2-pin male/female fan extension cable.

NEW. Bulk Packaged

AVC DA09025T12U 90mm x 25mm 4-Pin PWM High Speed CPU Fan

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:30:41 -0400

This ultra high speed ball bearing AVC is a very popular fan size for socket 775 cpu coolers. 90mm impeller with 80mm frame. A very nice feature of this fan, missing from most models this size, is that the frame is reversible; meaning that you can mount it to blow in either direction. You can also attach an 80mm fan guard.

Specifications

Dimensions: 90 x 90 x 25mm (80mm mounting frame)
Voltage: 12VDC
Voltage Range: 5.0~13.2V
Current: 0.70A (max)
Power: 5.52W (max)
Speed: 4400RPM (max)
Air Flow: 80.4CFM
Air Pressure: 10.02mmH2O
Bearing Type: One Ball/One Sleeve
Noise: 40dBA
Frame Style: Flanged; Reversible
Connector: 4-Pin Mainboard PWM/3-Pin compatible. Approx 6"
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Just Cooler 40mm x 10mm VGA/Chipset 12v 4-pin Fan

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 22:10:00 -0400

This 4-pin Just Cooler A4010M12S fan is powered directly off the power supply. It's well suited as a VGA or chipset cooler replacement fan. Get yours today.

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Current: 0.09A
Noise: 28dBA
Fan Speed: 5000RPM
Bearing Type: Sleeve
Connector: 4-Pin Molex (12" Length)
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Socket 478 Heatsink Retention Bracket Module Yellow

support@xsfans.com (XS Fans) — Mon, 10 May 2010 07:52:05 -0400

This yellow heatsink retention module fits standard socket 478 motherboards.

Included

1 bracket
4 push-pins

Dell Owners: This bracket is the same as dell P/N: 8T065 for Dimension 2300 & 2350. Just pop out the push-pins to use.

NEW. Bulk Packaged

NMB 40mm x 15mm 1606KL-04W-B59 12v Fan 3-Bare Wire

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:34:44 -0400

This very high speed dual ball bearing NMB 1606KL-04W-B59 fan has speed detection.

Specifications

Dimensions: 40 x 40 x 15mm
Voltage: 12VDC
Input Power: 1.02W
Current: 0.11A
Air Flow: 8.1CFM
Noise: 34dBA
Fan Speed: 8000RPM
Air Pressure: 0.250 in-H2O
Bearing Type: Dual Ball Bearings
Connector: NONE (Bare Leads; approx 10")
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Delta AFB0412MA 40mm x 10mm 3-Pin VGA/Chipset Fan 2BB

support@xsfans.com (XS Fans) — Wed, 07 Jul 2010 19:20:29 -0400

This 3-pin dual ball bearing Delta AFB0412MA is perfect as a VGA/Chipset fan. Get yours today!

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Input Power: 1.2W
Current: 0.10A
Air Flow: 9.6CFM
Noise: 30dBA
Fan Speed: 7000RPM
Bearing Type: Dual Ball Bearings
Connector: 3-Pin/2-Wire (11" Length)
Speed Sensor: NO

NOTE: This is the original AFB0412MA. Delta also produces a lower speed, 7-bladed Revision-A version.

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Everflow 60mm x 10mm Ultra High Speed BB Fan R126010DU

support@xsfans.com (XS Fans) — Sun, 09 May 2010 12:07:03 -0400

This ultra high-speed ball bearing Everflow R126010DU Rev A is the right size for cpu cooler fans, especially on Socket A/370 cpu's.

Specifications

Dimensions: 60 x 60 x 10mm
Voltage: 12VDC
Voltage Range: 7.0 ~ 13.2v
Current: 0.25A
Input Power: 3.0W
Max Fan Speed: 4800RPM
Max Air Flow: 19.41CFM
Max Air Pressure: 3.23 mm-H2O
Bearing Type: Single Ball Bearing
Noise: 37dBA
Connector: 3-Pin (approx 9")
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Internal USB A/F to Motherboard Pinout Adapter Cable

support@xsfans.com (XS Fans) — Mon, 12 Apr 2010 04:48:08 -0400

Convert a male USB header to a Type A female port.

Features

Attaches to motherboard USB 1 x 5-Pin header
Cable is compatible with both USB 1.1 and USB 2.0
Cable length: 8-inches
Pin positions can be changed to accommodate other configurations

NEW. Bulk Packaged

24pc Floppy, CDROM Mounting Screws Fine Thread

support@xsfans.com (XS Fans) — Tue, 01 Jun 2010 09:19:25 -0400

Quantity of 24 screws for mounting floppy drives, CD & DVD-ROM drives, and other internal computer devices requiring M3 fine-threaded screws.

NEW. Bulk Packaged

Microcool South Sink Southbridge Heatsink - Silver

support@xsfans.com (XS Fans) — Tue, 20 Apr 2010 23:08:36 -0400

SouthSink is part of Microcool's extremely popular passive ChipSink series. Microcool has developed these heatsinks so that they can be easily installed on motherboard components that are subject to intense heat during system overclocking and overvoltaging.

The high quality thermally conductive adhesives allow rapid application and maximum thermal transfer.

Specifications

Dimensions: 30(L)x30(W)x30(H) mm
Material: Extruded aluminum 6063
Coating: Anodized aluminum
Adhesive: Chomerics T405 Thermal interface pad
Weight: 30g
Function: Southbridge cooling

NEW. Bulk Packaged

Powerlogic PL42D12M 40mm x 20mm 2-Pin Low Noise Fan

support@xsfans.com (XS Fans) — Tue, 20 Jul 2010 18:31:40 -0400

The medium speed Powerlogic PL42D12M 40mm x 20mm 2-Pin fan produces remarkably little noise. It features a single ball bearing and a long 2-pin cable.

Specifications

Dimensions: 40 x 40 x 20mm
Voltage: 12VDC
Current: 0.07A
Fan Speed: 5000RPM
Noise: 22.5dBA
Bearing Type: Single Ball Bearing
Frame Style: Closed Corners
Connector: 2-Pin, approx 12"
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Y-Splitter Molex 4-Pin Power Supply Cable Doubler

support@xsfans.com (XS Fans) — Mon, 12 Jul 2010 14:04:06 -0400

Not enough Molex connectors on that power supply for all your hardware? Here's the solution! This Molex 4-pin power cable splitter is approximately 8" in length.

NEW. Bulk Packaged

12-inch 2.5mm 2-Pin Fan Extension Power Cable

support@xsfans.com (XS Fans) — Mon, 21 Jun 2010 08:01:43 -0400

This hard-to-find 2-pin fan extension cable has 2.50mm pitch male and female connectors. 12-inch length.

NEW. Bulk Packaged

3-Pin to 2-Pin Fan Adapter Cable

support@xsfans.com (XS Fans) — Fri, 04 Dec 2009 13:58:03 -0500

This adapter cable will allow you to plug a standard 3-pin fan into a 2-pin header. Length: approx 3".

NEW. Bulk Packaged

3-Pin to 4-Pin Molex Fan Adapter Cable w/Shroud

support@xsfans.com (XS Fans) — Fri, 04 Dec 2009 21:13:48 -0500

Get a brand new 3-pin to 4-pin adapter. It connects a 3-pin fan to a 4-pin power supply lead without using up the lead. This connector is necessary when using high powered 3-pin fans on most motherboards, or when there are no more 3-pin taps available on the motherboard.

NEW. Bulk Packaged

Right Angle SATA2 Cable 6-inch Serial ATA

support@xsfans.com (XS Fans) — Mon, 10 May 2010 23:42:17 -0400

This is a brand new 6-inch red SATA II data cable with one straight and one right-angle connector. Both connectors have a metal latch. Backward compatible with standard SATA.

NEW. Bulk Packaged

YLTC FD07015S1H 70mm x 15mm CPU Replacement Fan

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:38:23 -0400

This YLTC FD07015S1H 70mm x 15mm fan is the right speed and size to fit many cpu coolers. Replace that worn out CPU cooler fan today.

Specifications

Dimensions: 70x70x15mm
Voltage: 12VDC
Air Flow: 26.83 CFM
Noise: 33.76 dBA
Bearing Type: Sleeve
Speed: 4200 RPM
Current: 0.35A
Input Power: 4.2W
Air Pressure: 3.3 mmH2O
Connector: 3-Pin (approx 6")
Speed Sensor: YES

Condition: NEW
Packaging: Bulk Packaged
Additional Hardware: No

4-Pack Silver Anodized Aluminum Case/Thumb Screws

support@xsfans.com (XS Fans) — Thu, 31 Dec 2009 22:43:23 -0500

This new set of 4 silver anodized aluminum thumb screws look great and make life easier if you open your case a lot. So, put away that screwdriver!

NEW. Bulk Packaged

JMC 60mm x 20mm 2BB Temp Controlled Variable Speed Fan

support@xsfans.com (XS Fans) — Mon, 24 May 2010 06:55:32 -0400

This high-quality JMC-Datech 0620-12MBTA dual ball bearing fan is temperature controlled by an on-board thermistor.

Specifications

Dimensions: 60 x 60 x 20mm
Voltage: 12VDC
Max Current: 0.26A
Fan Speed: 2900 ~ 4300 RPM
Max Air Flow: 22.18CFM
Max Air Pressure: 0.156 in-H2O
Bearing Type: Dual Ball Bearings
Max Noise: 36.2dBA
Frame Style: Closed Corners
Connector: 3-Pin (approx 6")
Speed Sensor: YES

(connector may be brown, as in the photo, or white)

Condition: NEW
Packaging: Bulk
Additional Hardware: No

2-Pin to 2-Pin Mini Fan Adapter Cable

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:35:15 -0400

This adapter cable will allow you to plug a standard 2-pin fan cable into a mini 2-pin header found on many video cards and other components. Length: approx 3"

NEW. Bulk Packaged

2-Pin (2.50mm) to 3-Pin Fan Adapter Cable

support@xsfans.com (XS Fans) — Wed, 02 Dec 2009 12:59:26 -0500

Converts a common vga and chipset 2-pin fan connector (shown in the blue box), to a standard 3-pin. Length: approx 3"

NEW. Bulk Packaged

3-Pin to 2-Pin Mini Fan Adapter Cable

support@xsfans.com (XS Fans) — Mon, 16 Aug 2010 10:35:59 -0400

This adapter cable will allow you to plug a standard 3-pin fan cable into a mini 2-pin header found on many video cards and other components. Length: approx 3-inch

NEW. Bulk Packaged

80mm to 92mm Fan Adapter - Black

support@xsfans.com (XS Fans) — Sat, 14 Nov 2009 17:43:55 -0500

Increase airflow to you devices by using this adapter. Prefect for installing bigger fans on CPU heatsinks. Mounting hardware not included.

NEW. Bulk Packaged

Socket 478 Heatsink Retention Bracket Module Lavender

support@xsfans.com (XS Fans) — Sat, 06 Mar 2010 04:38:01 -0500

This lavender heatsink retention module fits standard socket 478 motherboards.

Included

1 bracket
4 push-pins

Dell Owners: This bracket is the same as dell P/N: 8T065 for Dimension 2300 & 2350. Just pop out the push-pins to use.

NEW. Bulk Packaged

AMCO Socket 478 Heat Sink Retention Bracket w/ Backplate

support@xsfans.com (XS Fans) — Mon, 12 Jul 2010 13:32:38 -0400

This standard AMCO TEC heatsink retention bracket works with any standard socket 478 motherboard. The sturdy metal backing-plate allows for the secure retention of even the heaviest heatsinks.

Included

1 bracket
4 mounting screws
1 metal backing plate

NOTE: Installation of this bracket requires access to the rear of the motherboard

NEW. Bulk Packaged

Masscool 120mm x 25mm Ball Bearing 3/4-Pin Fan FD12025B1L3/4

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:36:21 -0400

Masscool's 120mm FD12025B1L3/4 ball bearing case fan produces low noise and a high airflow rate to improve your system circulation and decrease the temperature in your computer. It features an extra long cable with both 3 and 4 pin connectors to insure compatibility. The cable is sleeved to reduce case clutter.

Specifications

Dimensions: 120 x 120 x 25mm
Voltage: 12VDC
Fan Speed: 1500RPM � 10%
Air Flow: 52.05 CFM
Current: 0.13A
Input Power: 1.56W
Service Life: 50,000 Hrs
Noise: 25 dBA
Frame Style: Closed Corners
Connector: 3/4-Pin approx 18"
Speed Sensor: YES

Condition: NEW
Packaging: Retail
Additional Hardware: (4) case mounting screws

Sunon 40mm x 10mm MagLev High Speed Fan - Bare Wire

support@xsfans.com (XS Fans) — Wed, 07 Jul 2010 19:20:57 -0400

This high speed Sunon KDE1204PFV1 is an ideal VGA/Chipset fan. It features Sunon's famous VAPO MagLev bearing system, and comes un-terminated; with bare, tinned leads.

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Input Power: 1.0W
Air Flow: 7.3CFM
Noise: 30dBA
Fan Speed: 7400RPM
Static Pressure: 0.23 inch-H2O
Bearing Type: VAPO Magnetic Levitation
Connector: NONE (12" Length leads)
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Delta FFB0612SHE 60mm x 38mm Super High Speed Fan

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:39:01 -0400

This super high speed Delta FFB0612SHE is an extremely powerful dual ball bearing model. It comes with tinned leads and no connector.

Specifications

Dimensions: 60 x 60 x 38mm
Voltage: 12VDC
Voltage Range: 7.0 ~ 13.2v
Current: 0.55A
Input Power: 6.60W
Max Fan Speed: 7000RPM
Max Air Flow: 43.44CFM
Max Air Pressure: 0.766 in-H2O
Bearing Type: Dual Ball Bearings
Noise: 50.5dBA
Connector: NONE (approx 12")
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Socket 478 1U Rackmount Heatsink Retention Bracket Module

support@xsfans.com (XS Fans) — Sat, 06 Mar 2010 04:39:41 -0500

This retention bracket fits a standard socket 478 motherboard. It's made for base clasp server cpu coolers. A standard socket 478 heatsink will NOT fit in this bracket. It will only take socket 603/423 sized heatsinks. It's not uncommon for heatsink manufacturers like Dynatron sell a socket 478 version of it's Xeon cpu coolers. The only difference is the retention brackets they ship it with. NOTE: This bracket includes no mounting hardware.

Included

1 bracket

THIS IS A NON-STANDARD BRACKET - READ DESCRIPTION

Examples of a few socket 478 cooler models that use these brackets. They are all adapted Xeon coolers:

Dynatron D64 (Their Xeon model: H64)
Dynatron D65
Dynatron D31
Dynatron D32
Dynatron D34
Dynatron D39
CoolJag JAC322C
CoolJag JACE44C
CoolJag JACO21C
CoolJag CJC665C

NEW. Bulk Packaged

Socket A/370/7 Heatsink Retention Clip Replacement

support@xsfans.com (XS Fans) — Sun, 20 Jun 2010 10:34:41 -0400

This generic Socket 7, 370, A/462 retention clip is a replacement that will fit many cpu coolers. Installation should be performed by advanced users only.

THIS CLIP IS NOT GUARANTEED TO
FIT ANY PARTICULAR HEATSINK.

IMPROPER INSTALLATION WILL DAMAGE YOUR CPU

INSTALL AT YOUR OWN RISK

NEW. Bulk Packaged

2-Pin Locking Connector Set w/ 8-inch Bare Leads

support@xsfans.com (XS Fans) — Mon, 29 Mar 2010 20:37:37 -0400

This connector male/female set has 8-inch bare leads. The 2.50mm pitch set has a very secure locking system so they can't accidently come apart.

NEW. Bulk Packaged

Case Fan/Grill Screws Extra-Long ~ Set of 4 ~ Chrome

support@xsfans.com (XS Fans) — Tue, 08 Jun 2010 11:05:54 -0400

These chrome case fan screws are a whopping 10mm long. They come as a set of 4.

NEW. Bulk Packaged

Intel Socket 775 Heat Sink/Fan up to Core Duo 3.0GHz E33681-001

support@xsfans.com (XS Fans) — Fri, 26 Mar 2010 07:29:29 -0400

Featuring an aluminum heat sink and a 3.5-inch fan, this Intel Heat Sink and Fan delivers the cooling performance your CPU needs! It supports Intel Core 2 Duo Socket 775 CPUs up to 3.0 GHz! Get that heat away from your CPU and upgrade to this heat sink and fan from Intel! Order today!

Specifications

Aluminum heat sink
Nidec 3.5-inch fan
12VDC
0.20A
Low profile
Supports Intel Core 2 Duo Socket 775 E8500, E8400 and E8200 CPUs up to 3.0 GHz; Wolfdate core 45nm
4-pin fan connector (12-inch length, approximate)
Ships in Intel plastic clamshell
Original Dow Corning thermal paste pre-applied

NEW. Bulk Packaged

T&T/AAVID 40mm x 10mm Ball Bearing 4-Pin Fan

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 22:10:22 -0400

This 4-pin T&T MW-410H12C fan connects directly to the power supply. Manufactured by Top & Tech for AAVID/Thermalloy.

Specifications

Dimensions: 40 x 40 x 10mm
Voltage: 12VDC
Current: 0.11A
Fan Speed: 6000RPM
Max Air Flow: 7.24 CFM
Bearing Type: Single Ball Bearing
Noise: 29.7CFM
Connector: 4-Pin Molex (approx 10")
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

4-Pack ZioTek Spring-Loaded Push Lock Fastener 16mm Plastic

support@xsfans.com (XS Fans) — Tue, 17 Nov 2009 19:35:15 -0500

These nylon push-lock fasteners are very effective for securing chipset and vga heatsinks. Instead of a steel spring, these fasteners use a simpler, cross-bow design that creates a much stronger spring effect. Mounting surface thickness must be at least 4mm for secure fit. Mounting hole thickness between 1mm-4mm. PRICE IS FOR A QUANTITY OF (4).

NEW. Bulk Packaged

6in LP4 to SATA Power Cable Adapter - M/M

support@xsfans.com (XS Fans) — Sat, 08 May 2010 17:07:45 -0400

This LP4 to SATA power adapter cable (6in) features one LP4 male connector and one male SATA power connector, allowing you to power a Serial ATA hard drive from a conventional LP4 connection, eliminating the need to upgrade the computer power supply for compatibility with the SATA hard drive.

Features

Compliant with Serial ATA 1.0 standard
Cable Length: 6 inches
Compliant Standard Serial ATA 1.0
SATA Power 15-Pin Connector (Male)
LP4 4-Pin Connector (Male)
Connects any Serial ATA Hard Drive to a standard internal power Connector
Ideal for desktop or servers that use Serial ATA Hard Drive

NEW. Bulk Packaged

AOC Socket 7 Pentium Low Profile 4-Pin CPU Cooler

support@xsfans.com (XS Fans) — Tue, 16 Mar 2010 22:58:02 -0400

This low profile cooler from AOC/Evercool has some nice features. It's ball bearing fan is nice and quiet. And, the fan frame is extended to the edge of the heatsink, creating a ducted airflow for more efficient heat transfer. The fan is powered directly off the system power supply with a 4-pin molex connector; so it's compatible with the very oldest Socket 7 motherboards; the ones that didn't have fan headers. Includes thermal grease pack.

Specifications

Overall Dimension: 57 x 67 x 25 mm
HeatSink Material: Aluminum
Fan Size: 50 x 50 x 10mm
Rated Voltage: 12VDC
Input Power: 0.9W
Airflow: 10.5 CFM
Bearing Type: Ball
Connecter: 4-Pin (approx 8")
Fan Speed: 4000 RPM
Speed Detection: NO
Application
- All Socket 7 & 5
NEW. Retail Box

Nidec 60mm x 25mm Low Noise 2-Pin 2-Ball Bearing Fan

support@xsfans.com (XS Fans) — Sun, 09 May 2010 12:08:31 -0400

This dual-ball bearing Nidec Beta V series TA225DC B33399-55 is a quiet, high quality fan.

Specifications

Dimensions: 60 x 60 x 25mm
Voltage: 12VDC
Air Flow: 12CFM
Current: 0.11A
Input Power: 1.3W
Noise: 17.2dBA
Fan Speed: 2600RPM
Bearing Type: Dual Ball Bearings
Frame Style: Open Corners
Connector: 2-Pin w/sleeved wires (approx 10")
Speed Sensor: NO

Condition: NEW
Packaging: Bulk
Additional Hardware: No

NMB 60mm x 15mm Temp Controlled 3-Pin 2BB Fan w/Tach

support@xsfans.com (XS Fans) — Sun, 07 Mar 2010 00:07:53 -0500

The onboard thermistor controls the speed of this high quality dual ball bearing NMB 2406KL-04W-B56 fan. It's a fine choice as a cpu fan replacement.

Specifications

Dimensions: 60 x 60 x 20mm
Voltage: 12VDC
Max Air Flow: 18.3CFM
Max Noise: 34dBA
Bearing Type: Dual Ball Bearings
Fan Speed 3500 ~ 4600 RPM
Max Current: 0.21A
Input Power: 1.92W
Connector: 3-Pin (length 7")
Speed Sensor: YES

Condition: NEW
Packaging: Bulk
Additional Hardware: No

Standard 2-Pin Fan Connector w/ 8-inch Bare Leads - 2pcs

support@xsfans.com (XS Fans) — Wed, 05 May 2010 07:42:34 -0400

This standard 2-pin connector is used on many computer fans that don't have a speed detection wire. 2.54mm pitch. Quantity: 2

NEW. Bulk Packaged

24pc Standard Case Screws Hex-Head Philips

support@xsfans.com (XS Fans) — Tue, 27 Oct 2009 22:13:20 -0400

Quantity of 24 chrome case screws. Standard 6-32 coarse thread, philips hex head.

NEW. Bulk Packaged

50mm Wire Fan Grill - Chrome

support@xsfans.com (XS Fans) — Fri, 20 Nov 2009 12:49:49 -0500

Prevent objects from getting caught in your 50mm fan with this stylish chrome wire grill. Mounting screws sold separately.

NEW. Bulk Packaged

AVC 92mm x 38mm 4-Pin PWM 2BB HSF Fan

support@xsfans.com (XS Fans) — Sun, 11 Apr 2010 16:57:57 -0400

This extremely high output dual ball bearing AVC DS09238B12HPFAF fan has the PWM circuitry required on todays latest motherboards.

Specifications (full power)

Dimensions: 92 x 92 x 38mm
Voltage: 12VDC
Voltage Range: 5.0~13.2 VDC
Current: 0.90A
Input Power: 10.8W
Max Fan Speed: 5000 RPM
Max Air Flow: 104.07CFM
Bearing Type: Dual Ball Bearings
Noise: 51.1 dBA
Frame Style: Open Corners
Connector: 4-Pin Mainboard w/PWM (3-Pin Compatible) approx 12"
Speed Sensor: YES

Condition: NEW PULL
Packaging: Bulk
Additional Hardware: No

K8/AM2 Heatsink Retention Clip Replacement 3-Tab

support@xsfans.com (XS Fans) — Sat, 06 Mar 2010 05:14:50 -0500

This is a common AMD K8/AM2 retention clip mechanism found on many stock AMD cpu coolers. Installation should be performed by advanced users only.

THIS CLIP IS NOT GUARANTEED TO FIT ANY PARTICULAR HEATSINK.

IMPROPER INSTALLATION WILL DAMAGE YOUR CPU

INSTALL AT YOUR OWN RISK

NEW. Bulk Packaged

Socket 423/603/604 Heatsink Retention Bracket w/ Clips

support@xsfans.com (XS Fans) — Mon, 02 Aug 2010 09:26:45 -0400

Keep your socket 423, 603 (400-533MHz FSB) or 604 (400MHz FSB) heatsink in place with this new retention module and clip set. This is a low cost way to replace your broken retention bracket, so you can keep that CPU safe.

Included

2 brackets
2 retention clips

(Not compatible with socket 603/604 Xeons with 800Mhz FSB or above, Nocona, CEK mounted heatsinks with passive stand-offs attached).

NEW. Bulk Packaged

7-volt 4-Pin Fan Power Adapter Cable Speed Reducer

support@xsfans.com (XS Fans) — Tue, 08 Dec 2009 06:19:23 -0500

This is a simple, inexpensive alternative to a fan speed controller to quiet a noisy case fan. This adapter will run a single 4-pin fan at 7-volts instead of 12v.

NEW. Bulk Packaged